How To Fix Roku Remote Blinking Green-Full Guide
7 mins read

How To Fix Roku Remote Blinking Green-Full Guide

Do not become alarmed if you have a Roku TV and its Roku remote is blinking green light. A green light that is often blinking indicates that there is a problem, which you should identify and resolve. The best action is to take quick action rather than wait until things deteriorate.

If you do not take the necessary action right away, your remote control may start to have pairing troubles or stop working as it should control your TV. Continue reading to learn why your Roku remote might be blinking green light and possible solutions in order to avoid this inconvenience.

How To Fix Roku Remote Blinking Green
How To Fix Roku Remote Blinking Green

Why Is Your Roku Remote Blinking Green?

If the green light on your Roku remote controller is flickering, this indicates a malfunction. Normally, there would be a warning indication on your TV screen if there is any malfunction before or around the time you begin to see a blinking green light on your remote.

In this instance, avoiding the issue will not make it go away. You already know what would happen – you will be unable to access your favourite shows and other entertainment stuff – and you will also be unsuccessful in operating your Roku device at some time. And that is not what you want. But why is this happening? Let’s probe deeper into the issue.

What Are The Causes For Roku TV Remote Blinking Green?

The green light on your remote control will blink if there is a problem, which is the only possible explanation. The most important query here is: why is the remote linking green?

Examine some of the potential causes of the remote green light that is flashing.

  1. Roku TV Remote Battery is Low
    When you see the green light on your Roku remote control flickering, try changing the batteries with fresh ones. If nothing of those solutions works to fix the issue, something else is causing the problem with your remote. Alkaline batteries, according to some users, are preferable for Roku remotes.
  2. Something is obstructing its functioning
    Interference from other wireless devices close to your Roku device is one typical reason for the green light flashing on the Roku remote. Microwaves, cordless phones, Bluetooth speakers, and similar gadgets fall under the category of wireless devices. There is a possibility that the blinking green light will appear if anything similar is close to your Roku device.
  3. You have got a bad remote
    Your Roku TV and its remote control may not always be the issue. Simple solutions like a broken remote control might exist. The only solution in such a situation is to get a new Roku control.

Top Fixes to Roku Remote Blinking Green Light

Following are some of the easy steps to fix your Roku remote if it is blinking green light:

  1. Replace the Battery

Low batteries are the most typical reason for the blinking green light on your Roku control, as we learned above. This indicates that your Roku lacks sufficient power to communicate with your TV.

All you need to do is replace your Roku remote batteries, and your remote will start functioning like before. To prevent this problem in the future, avoid letting your batteries run out of power.

  1. Get rid of any obstructions

The Roku remote’s blinking green light may be brought on by adjacent wireless interference. Ensure that your Roku TV is in a different area before you change the batteries or acquire a new remote. This ought to be effective.

Additionally, try to keep other wireless equipment far from your TV and Roku remote to prevent future occurrences of the blinking green light.

  1. Make Sure Your Remote is Set Up Correctly

Make sure your remote is configured correctly. If this is not the case, then you could be experiencing the blinking green light issue. How to configure your Roku remote, in detail:

  • First, ensure a strong internet connection for your Roku remote controller.
  • Next, go to the Remote Setting and choose your TV type. 
  • Select ‘Yes’ to confirm your television’s manufacturer. 
  • Manually enter your TV details if your system cannot recognize your TV brand.
  • Press Yes to confirm your selection.
  • To access your Roku entertainment once again, click ‘OK.’
  1. Pair your remote again

Re-pairing your Roku remote with your streaming device is another choice. This technique often resolves several problems that Roku customers have. To perform this correctly, adhere to the procedures below:

  • Remove the Roku cable.
  • Open the battery case with caution.
  • After a little delay, remove the batteries from your Roku remote.
  • Put the batteries after a few seconds.
  • You do not have to replace the battery cover. 
  • Connect your Roku player.
  • Press and hold the ‘Reset Button’ on your Roku Remote for at least 3 seconds or till the time you see a blinking light. 
  • Replace the battery cover.
  • You should see a pairing message on the screen once the machine boots.
  • Follow the pairing guidelines.
  1. Verify the HDMI Connection.

If you have a Roku streaming stick, you may want to make sure the HDMI connection is working properly.

This option might work as inserting a Roku streaming stick into the TV’s HDMI port can cause it to malfunction. Try a different port and check if it functions properly.

By submitting your serial number and any other crucial information Roku may need, you can apply to acquire an HDMI extender for free and be assured if the problem is with your TV or with your Roku device. 

Check your EPA controller, then use the remote once more to see whether the green blinking light is on.

  1. Try the hard reset option

Be aware that doing this may erase your existing device settings, forcing you to reset everything. Use the following procedures if you have made up your mind to move forward:

  • You should open your Roku device’s battery compartment.
  • Remove the power wire and batteries from your streaming device.
  • Prior to reattaching the power cable, give it around five minutes.
  • Watch for the Roku home screen to appear on the screen.
  • In the battery compartment, swap out the batteries.
  • Give at least 30 seconds to connect your remote and your streaming player. 

Conclusion: If any of the solutions mentioned above do not stop your Roku remote from flashing, you will need to purchase a new remote. Make sure you buy the right remote model that suits your Roku device before purchasing a new remote. Hopefully, this post has been useful to you. Leave comments if you have any queries or doubts.

Leave a Reply

Your email address will not be published. Required fields are marked *